The ZyXEL IES-5005M is equipped with non-blocking Gigabit backplane, failover-enabled Management Switch Cards (MSC), dual power modules and high-port density DSL line cards. With embedded IP-centric QoS, security and multicasting firmware features, the IES-5005M is a chassis-based system that facilitates Telco/ISP delivering quality experience to today's demanding residential and business customers. Such features enable it to achieve its infrastructure provisioning criteria of reliability, flexibility and scalability at competitive CAPEX/OPEX.
The compact design of IES-5005M offers a 4RU-height and five-slot chassis-based system with a separated 3RU splitter frame. One slot is reserved for an MSC card and the remaining four slots are for DSL line termination cards. The ADSL2/ADSL2+/G.SHDSL.bis line cards have 48 ports while the VDSL2 line card comes with 24 ports. In a standard rack, you can install up to ten units without a splitter chassis or up to six units with a splitter chassis.
Four hot swappable DSL line cards (ADSL2+ over POTS, ADSL2+ over ISDN, G.SHDSL and VDSL2) are available. The ADSL2+ over POTS and the ADSL2+ over ISDN give subscribers with asymmetric transmission bandwidth of up to 25 Mbps/1.2 Mbps. The G.SHDSL.bis provides symmetric transmission bandwidth of 4.096 Mbps, 8.192 Mbps or up to 16.384 Mbps (similar to a lease line). The VDSL2 offers up to 65 Mbps/35 Mbps high speed connectivity per port with various loop distances over copper wiring.
Features:
|
Non-blocking Gigabit Backplane |
|
IEEE 802.1p Priority Queuing, Packet Classification and Queue Scheduling (SP, WRR) |
|
VLAN Bridging, VLAN Trucking and VLAN Stacking |
|
IGMP v1, v2 Snooping and Proxy |
|
256 Multicast Groups |
|
Anti IP/MAC Address Spoofing |
|
Rule-based Packet Filtering |
|
Failover Network Termination |
|
Single/Dual End Loop Test |
|
ATM Forum TM 4.0 |
Specifications:
DSL Compliant 1 |
ADSL: G.992.1 Annex A, G.992.3 Annex A, G.992.5 Annex A G.992.1 Annex B, G.992.3 Annex B, G.992.5 Annex B Support G.992.3 and G.992.5 Spectral Mask Support Annex M and Annex L in G.992.3 and G.992.5 Support EOC and Overhead Channel Access |
DSL Compliant 2 |
Support the latency path function Support loop diagnostic function specified Support the power management capability Support the capability of the Seamless Rate Adaptation (SRA) on-line configuration Dual end loop test SHDSL: G.991.2, G.991.2.bis VDSL2: G.993.2, G.994.1, G.997.1 |
ATM Traffic Management |
8 VPC/VCC per DSL port Support UBR, CBR, rt-VBR, nrt-VBR QoS Mechanisms Support ATM Forum TM 4.0 peak cell rate traffic parameter Support downstream traffic shaping function per ATM PVC Support ATM F5 OAM cells for End-to-End Loop back test (ITU-T Rec. I.610) |
Performance |
IEEE 802.1p CoS with priority queuing Eight queues with packet priority scheduling (SPQ, WFQ, WRR) Support 256 multicast groups Support 384 copies for each multicast group The maximum channel zapping processing time is 250 ms DSCP to 802.1p mapping |
Security |
Port isolation IEEE 802.1x (Authentication) Rule-based packet filtering (L2 - L4 ACL) MAC count limiting ARP broadcast filterin DHCP broadcast filtering DHCP snoopin NetBiOS filterin IGMP filtering Anti IP/MAC address spoofing |
VLAN |
4096 IEEE 802.1Q compliant VLAN tagging Port-based VLAN VLAN stacking VLAN Bridge Function (multiple PVCs to one VLAN)(N:1) PVC and VLAN one to one mapping (1:1) VLAN Trunking (Single PVC join Multiple VLAN)(1:N) Support GVRP function |
Traffic Management |
Tunneling: PPPoE, MP encap. over ATM (RFC 2684) STP: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s IEEE 802.3ad (Link Aggregation Control Protocol) IP multicast forwarding IGMP v1, v2 snooping/proxy IGMP multicasting channel limiting DHCP Relay Option 82 Multicast bandwidth control L2 - L4 ACL IGMP group count/filtering profile |
Network Management 1 |
Local management through a craft terminal Web-based Management Interface In-band and out-of-band IP interface for management (SSH, SFTP) SNMP Management (through ZyXEL NetAtlas Access EMS) SNMPv1/v2c/v3 agent/traps Standard MIBs |
Network Management 2 |
RFC 1213 MIB II ADSL Line MIB (RFC2662)/Extension Line MIB (RFC 3440) SHDSL Line MIB (RFC 3276) VDSL line MIB (RF3728) Bridge MIB/Extension MIB RMON MIB (RFC 1757) Vendor specific MIBs, e.g., Chassis Management MIB (Fan Speed, Voltage, Temperature) |
Hardware |
5-slot rack mountable enclosure, 19" or 23" chassis 4 slots for DSL line termination cards 1 slots for management and switch cards 2 DC power input module and filter One FAN and dust filter module |
Operating temperature |
0deg. C - 50deg. C |
Storage temperature |
-40deg. C - 85deg. C |
Humidity |
5 - 95% (non-condensing) |
Power Supply |
-48 V DC |
Power Consumption |
350 W |
Dimensions |
440 x 250 x 151.9 mm / 17.32 x 9.84 x 5.98 inch |
Weight |
5 Kg / 11.02 lbs |
|
|