The E-50 Series Video Entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication and color composite video of who is at your door or gate. The E-50's compact size allows it to be mounted in a standard single gang electrical box. The E-50 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-50 faceplates (PNL50) can be purchased separately and are available in all five standard finishes.
The E- 50’s blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring. Note: LED not available on all models. Contact Viking for more information.
The E-50 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E-50 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer.
The E-50 features a built-in high resolution color video camera, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.
For outdoor installations where the unit is exposed to precipitation or condensation, the E-50 Series is available with Enhanced Weather Protection (EWP), see DOD# 859.
Applications
Features
Specifications
Entry Phone Specifications
- Power: Telephone line powered (18 VDC/20mA minimum)
- Dimensions: Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875” x 3.125” x 0.18”),
- Phone Board: 71mm x 46mm x 42mm (2.8” x 1.8” x 1.65”)
- Shipping Weight: 0.45 kg (1.0 lbs)
- Speaker Volume: Approximately 62db maximum @ 1m
- Ring Voltage: 25V AC RMS minimum (for auto answer)
- CPC Disconnect Time: 300ms minimum
- REN: 0.8A
Camera Specifications
- Power: 5-9V DC regulated 150mA (6V DC adapter included)
- Image Sensor: 1/4” color CMOS
- Video Output: 1 VP-P composite, NTSC, 75 ohms
- Resolution: 450 lines (640 x 480 / 307,200 pixels)
- Sensitivity: 0.26 LUX (20 IRE) F 2.0
- Lens: 3.4mm, pinhole 70° FOV (Field of View)
- Tilt/Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30° (see Diagram A)
- Maximum Wire Run Length: 150 ft with CAT5E (longer video runs possible w/ RG6 or RG59)
Entry Phone / Camera Specifications
- Operating Temperature: -34° C to 65° C (-30° F to 150° F)
- Humidity: Standard model: 5% to 95% non-condensing, EWP model: Up to 100%
- Connections: (5) gel-filled butt connectors
