Retro-Fit Mounting Bracket

Mount Your Viking Junction Box into an Existing Wall
The VE-RMB attaches to the junction box supplied with Viking doorboxes and allows installation into existing walls. The bracket is screwed to the back of the junction box and provides a means of mounting even when no wall stud or support beam is accessible.

Simply drill a 1/4 inch hole in the back of the junction box, and use the screw provided to attach the bracket to the box.After cutting a hole in the wall, slip the assembly through the hole and tighten the screw. No need to find a wall stud or support beam!



Applications
Allows mounting Viking junction boxes into an existing wall
Handles a wide range of wall thicknesses
Holds the junction box in the wall until the doorbox can be installed
Made from rust-resistant galvanized steel
Mounting screw included
Made in the U.S.A.

Features
Specifications
Shipping Weight: 0.09 kg (0.2 lbs)
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
Junction Box Requirement: Use with the Viking 102mm x 102mm x 51mm (4” x 4” x 2”) plastic box, part number: 259576
Minimum Wall Cavity Depth: 83mm (3.25”)
Minimum Wall Thickness: 3.2mm (0.125”)
Maximum Wall Thickness: 19mm (0.75”)